Serial Communication Cables - Christie CineIPM-2K User Manual

Serial Communication Cables

Serial Links to Projector
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)
FOR GENERAL COMMUNICATIONS:
communication with the Cine-IPM 2K so that it can be controlled remotely from a
PC or other controller. From a PC, connect a standard 9-wire RS232 serial cable to
the port located on the Cine-IPM 2K front panel. Or, for long-distance
RS232 IN
(>100 ft.) links with an RS422-compatible PC or controller, connect RS422 cable to
the port.
RS422
FOR SOFTWARE DOWNLOADS:
either serial link.
NOTE: Using an Ethernet link for downloading new software to the projector is not
supported.
A serial link of RS232 or RS422 enables ASCII
Download new software to the Cine-IPM 2K via
A p p e n d i x C
C-1