Christie CineIPM-2K User Manual page 60

OPERATION
3-34
Use the pull-down list to choose a pre-defined default or
MENU LOCATION —
customized location for the display of all on-screen menus.
To create a custom menu location quickly, choose a preset that is closest to the
desired location. Then adjust the slidebars of Horizontal Shift and Vertical Shift to
move the menu to the desired location. To prevent cropping of larger menus, avoid
locations too close to a corner or edge.
HORIZONTAL AND VERTICAL SHIFT —
customized menu location.
DISPLAY CHANNEL LIST —
list whenever you press '
list icon in the Channel Setup menu will then appear here. The Display Channel
List option also enables on-screen feedback when using the
hide the channel list and input dialog box while switching channels and sources
during a presentation, clear the checkbox.
NOTE: The Channel List and input dialog box cannot be hidden during use of the
menus.
DISPLAY SLIDEBARS —
current image whenever an adjustable parameter is selected directly with a key such
as or . If "Display slidebars" is unchecked, these slidebars can still be
Bright
Contrast
accessed, but will be hidden during adjustment. This option does not affect slidebars
in menus.
DISPLAY ERROR MESSAGES —
detected in either the incoming signal or Cine-IPM 2K. Select "Screen" or "All"
(default) to see brief on-screen messages. This is particularly recommended during
setup or testing of your Cine-IPM 2K system. Or select "Serial Ports" to receive
messages via RS232 (or RS422) serial communication only. To hide error message
displays, such as during shows and presentations, select "Off" or "Serial Ports".
SPLASH SCREEN SETUP —
display a special introductory splash screen image, such as your company logo,
graphic or message.
•
Always Off = A splash screen never appears
•
Startup Only – The splash screen logo appears
at projector startup only.
•
Startup And No Signal– A splash screen appears at startup only if there is no
source signal.
•
Always On = A splash screen is always on behind the current display image,
similar to wallpaper.
To replace the default "Christie logo" splash screen (or other) with one of your own,
use KoRE Librarian to download the desired .bmp to the Cine-IPM 2K. This will
overwrite the current splash screen content in Cine-IPM 2K memory.
Shift your menus as desired, creating a
Enter a checkmark if you want to see a scrollable channel
' from your presentation. Channels marked with a
CHANNEL
Enter a checkmark to superimpose a small slidebar over the
Choose how you want to be notified of errors
Use the Splash Screen to choose when you would like to
key. If you prefer to
Input
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)