Status Menu; Cine-Ipm 2K Source Selection Via Tpc - Christie CineIPM-2K User Manual

OPERATION
3.8

Status Menu

3.9 Cine-IPM 2K
Source
Selection via
TPC
C ontroller
3-48
NOTE: Fade Time is not currently supported for 2048 x 1080 or 1920 x 1080
outputs.
Numbers Select Main
Image
Use Numbers Select Main Image
to use the numeric keys #1-8 as
input keys. This remapping of
the keypad (see right) can be
particularly useful with PIP
displays, providing a convenient
shortcut for changing the
primary (background) image
without first having to return to
the Main menu. To use the keys
in this manner all of the time,
even with single Cine-IPM 2K
displays, select Always. For
normal keypad function, select
Never (default). Set to "When
PIP Active" to activate number
keys as input keys only when
PIP is in use.
NOTE: Numbers Select Main
Image keypad functionality works only when menus are closed
Refer to the Cine-IPM 2K's read-only Status menu to determine what versions of
hardware and software are installed in the Cine-IPM 2K, and what its serial number
is. The Status menu also identifies the current channel, its input location, frequencies
and other details. If your Cine-IPM 2K is connected via RS232 "B" to the CP2000
projector, the TPC Status page also provides similar Cine-IPM 2K status information.
Scroll the full Status menu using
NOTE: In all cases, the Cine-IPM 2K's RS232 "B" port must be connected to the
CP2000.
: If your Cine-IPM 2K is connected to the CP2000 via
USING THE TPC ONLY
you can use the TPC for a quick single-step switch to a specific Cine-IPM 2K non-
cinema input #1-6. This source must first be configured for TPC use in the Custom
menu of the TPC as described in 2.5, Setting Up the TPC for Source Selection—then
select this button at the TPC Main menu. Use
refine Cine-IPM 2K display settings as desired.
Figure 3.26. Keypad Remap
. Use for page up/down.
and/or on the keypad to
Auto
Menu
Setup
Cine-IPM 2K User's Manual
DVI-1
020-100164-01 Rev. 1 (01/08)