Christie CineIPM-2K User Manual page 9

Step 4
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)
Connect DVI Output
Connect a DVI cable between the
TO PROJECTOR:
rear panel and the
DVI-1
Distance for DVI Output
Up to 3 ft. / 1m
4 ft. – 16 ft. / 1.25 – 5m
Over 16 ft. / 5m
Figure 2.4. Standard DVI Connection for 8-bit Output on the CP2000
To use an additional display device such as a digital monitor or
TO 2 nd DEVICE:
second projector, connect the second DVI cable between
rear panel and the
extra device (Figure
2.5). Display devices
connected to
DVI-2
must accept DVI, i.e.
they must be digital—
the DVI-VGA adapter
is for use only.
DVI-1
In addition, the device
must accept the Cine-
IPM 2K format
selected.
port on the CP2000. See Figure 2.4.
DVI Cable Required
Use DVI cables provided (2)
Use a standard DVI cable
Use a fiber-optic (or similar) cable
— Contact Christie
Figure 2.5. Adding a 2
INSTALLATION AND SETUP
port on the Cine-IPM 2K
DVI-1
on the Cine-IPM 2K
DVI-2
nd Display Device
2-3