6.29.2 Changing the unit (A/V) from a percentage of current
and voltage
f701 :Current/voltage unit selection
Function
These parameters are used to change the unit of monitor display.
% A (ampere)/V (volt)
Current 100% = Rated current of inverter
Input/output voltage 100% = 200Vac (240V class), 400Vac (500V class)
Example of setting
During the operation of the VFMB1S-2015PL (rated current: 8.0A) at the rated load (100% load), units are
displayed as follows:
1) Display in percentage terms
%
Output current:
%
Input voltage:
[Parameter setting]
Title
Function
Current/voltage unit
f701
selection
*
The f701 converts the following parameter settings:
A display : Current monitor display: Load current, torque current
Motor electronic-thermal protection level 1 & 2
DC braking current
Stall prevention level 1 & 2
Small current detection current
V display : Input voltage, output voltage
Note) Base frequency voltage 1 & 2( , ) always displayed in the unit of V.
2) Display in amperes/volts
100%
100%
0: %
1: A (ampere) / V (volt)
F-105
Output current:
8.0A
Input voltage:
200V
Adjustment range
, f173
f251
f601 , f185
f611
E6581697
6
Default setting
0