NTI SPLITMUX-DVI-4RT Installation And Operation Manual page 83

HOTMOUSE
HOTMOUSE CURSOR IN WIN MODE
Hotmouse Cursor in Win MODE (continued)
Repositioning windows
Enable Hotmouse Cursor. Move the Hotmouse Cursor to the window that you wish to move and press the left
mouse button.
Note: When the Hotmouse Cursor moves over a window, its appearance changes (arrows
pointing up, down, left and right.).
Example: Repositioning the windows
Channel 2 is active and the
hotmouse is activated
Move the hotmouse cursor to the top right corner of the signal window, and the following buttons will appear:
= Open OSD hotmouse context menu
O
= Swap signal windows. After this is selected, the other window is clicked.
S
= Toggle aspect ratio locking for current window
R
78
SPLITMUX - Installation and Operation Manual
3
1
2
4
3
1
3
Channel 2 is moved to a new
location on the screen..
2
4