NTI VOPEX Series Installation And Operation Manual
4, 8 or 16 port dvi splitter
Hide thumbs
Also See for VOPEX Series:
- Installation and operation manual (12 pages) ,
- Manual (5 pages) ,
- Installation and operation manual (6 pages)
Related Manuals for NTI VOPEX Series
Summary of Contents for NTI VOPEX Series
- Page 1 ® VOPEX Series VOPEX-DVIS(A)-x 4, 8 or 16 Port DVI Splitter Installation and Operation Manual Front and Rear Views of VOPEX-DVIS-8 MAN065 Rev Date 1/30/2017...
-
Page 2: Table Of Contents
TRADEMARK VOPEX is a registered trademark of Network Technologies Inc in the U.S. and other countries. COPYRIGHT Copyright © 2009-2017 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202. -
Page 3: Introduction
For Stereo Audio support, add an “A” to the model number (i.e. VOPEX-DVISA-x)(4 and 8 port models only). MATERIALS Materials Supplied with this kit: • NTI VOPEX-DVIS(A)-4/8/16 DVI Video Splitter • 100VAC to 240VAC at 50 or 60Hz-5VDC/3.0A AC Adapter (4 and 8 port models only) •... -
Page 4: Connectors And Leds
NTI DVI Video Splitter CONNECTORS AND LEDS LABEL CONNECTOR/LED DESCRIPTION 3.5x1.3mm Power Jack for connection of power supply 5V 3.0A Power Green LED illuminates to indicate proper power to the unit DVI Video Out DVI female connector for connection of the display devices... -
Page 5: Installation
NTI DVI Video Splitter INSTALLATION The VOPEX is a Plug-and-Play device with no special configuration settings and easy installation steps: Before connecting the VOPEX to the video source, make sure the video source and the monitor(s) are turned OFF. 2. Connect the video source to the DVI port labeled “DVI Video In"... - Page 6 NTI DVI Video Splitter 4. For models with audio support, connect the SA-3-MM stereo audio cable between an audio source and the “AUDIO IN” port on the VOPEX. Connect any self-powered stereo audio speakers to the “AUDIO OUT x” ports.
-
Page 7: Cascading
Connect DVI-enabled displays to the cascaded VOPEXs for a larger configuration. Tip: Any size NTI VOPEX-DVIS(A)-x can be used interchangeably in the cascaded configuration. Note: Additional tiers of slave units can be added, however If too many levels of slave units are added, the image on the... -
Page 8: Technical Specifications
NTI DVI Video Splitter TECHNICAL SPECIFICATIONS VIDEO Video Source Computer, Satellite Receiver or DVD player with DVI-D output Video Connections Female DVI-I Frequency 165 MHz Supported Standard Resolution HDTV resolutions to 1080p; Computer resolutions to 1920 x 1200 @ 60Hz... -
Page 9: Troubleshooting
NTI DVI Video Splitter TROUBLESHOOTING If the VOPEX is not working properly, please look for a solution in the list below: PROBLEM: No video at all Check cable connections on the video source, monitor and the VOPEX. After reconnecting, if a CPU is the video SOLUTION: source, the CPU may need to be re-booted in order to sense the monitor connection.
Need help?
Do you have a question about the VOPEX Series and is the answer not in the manual?
Questions and answers