Hotmouse Cursor In Win Mode - NTI SPLITMUX-DVI-4RT Installation And Operation Manual

HOTMOUSE CURSOR IN WIN MODE

Hotmouse Cursor in Win MODE
Change active channel
Enable Hotmouse Cursor. Move the Hotmouse Cursor to the window of the channel you wish to activate
and press the left mouse button.
Note: When the Hotmouse Cursor moves over a window, its appearance changes (arrows, channel number).
Note: To close the Hotmouse Cursor, left double click or use hotkey + M in Win mode.
Example: Switch from channel 2 to channel 3
1
2
Channel 2 is active
Resizing of windows
Activate Hotmouse Cursor. Move the Hotmouse Cursor to the window area, hold down the left mouse
button and drag the window to the desired size.
Note:
As soon as the Hotmouse Cursor moves over a window, its appearance changes
(arrows pointing vertically or horizontally).
Example: Resizing windows
1
2
Channel 2 is needs to be
resized.
SPLITMUX - Installation and Operation Manual
3
1
4
Channel 3 is selected.
3
4
The edge of channel 2 is
selected for vertical resizing.
3
3
2
4
3
1
2
4
HOTMOUSE
3
1
2
4
Channel 3 is active.
3
1
2
2
Channel 2 is resized.
77
4