NTI SPLITMUX-DVI-4RT Installation And Operation Manual page 7

INTRODUCTION
FEATURES
DVI & VGA
SPLITMUX supports resolutions of up to 1920 x 1200 @ 60 Hz for both DVI and VGA.
Any combination of VGA and DVI at all standard resolutions is possible at inputs and output. Analog video input
is converted to digital. If an analog display is connected, SPLITMUX converts the digital signal to analog
at the output. Internally, SPLITMUX processes video purely digital guaranteeing superior digital image
quality.
USB & PS/2 for keyboard / mouse / touch screen / trackball
Use either PS/2 or USB ports on the computer to connect keyboard and mouse to SPLITMUX. It supports
any combination. To connect the console, SPLITMUX features two USB ports for mouse, keyboard,
touch screen or trackball connection.
Transparent USB 2.0
SPLITMUX features a transparent high speed USB 2.0 matrix: USB 2.0 devices (e.g. printer, external
memory, memory stick,webcam, 3D mouse, finger printer) can be switched to computers connected.
Operation
There are six ways to operate SPLITMUX, switch channels, and select display modes:
1. Using the buttons on the front of the unit
2. Using configurable hotkeys (default HOTKEY is <Ctrl> + <Alt>)
3. Using the unit's external configuration software on a remote computer
4. Via a serial port using the protocol DCP XML
5. Using mouse functions (Hotmouse)
6. Using a touch screen
The configuration of SPLITMUX is carried out by means of an On Screen Display (OSD) that can be
opened and navigated either with keyboard commands, front panel buttons or remotely via ConfDev on an
external PC.
The LEDs on the front panel indicate the unit's current status.
Use the serial (RS232) or USB port for remote control and firmware updates.
2
SPLITMUX - Installation and Operation Manual