Factory Reset - NTI SPLITMUX-DVI-4RT Installation And Operation Manual

ON SCREEN DISPLAY
OSD - COMPUTER - EDID/DDC
EDID/DDC (continued)
Note:
Please keep in mind that this setting will overwrite the automatic analog input mode detection. If you
connect a different video source, or change the video mode from the PC, you may need to change
this setting again to get correct results. For the detection of digital input signals this setting has no effect.
Alternatively, the display EDID data can be copied to the inputs:
An overview of the contents of the display EDID is seen above.
It has the following write options:
WRITE TO INPUT 1
WRITE TO INPUT 2
WRITE TO INPUT 3
WRITE TO INPUT 4
WRITE TO ALL INPUTS
Note:
The content of the input EDIDS can be reset to default by the OSD function CONFIGURATION /

FACTORY RESET.

68
SPLITMUX - Installation and Operation Manual
write the monitor EDID to input 1
write the monitor EDID to input 2
write the monitor EDID to input 3
write the monitor EDID to input 4
write the monitor EDID to all inputs