NTI SPLITMUX-DVI-4RT Installation And Operation Manual page 106

ANNEX
Knowledgebase Entries
Legend:
<x> denotes a keyboard key
<x> + <y> = press keys simultaneously
<x> - <y> = press keys consecutively
"If multiple SPLITMUX-DVI-4RT Units are Cascaded, can you manually size the individual screens
and save your settings as a preset?"
1, Configure the Master hot key setting to activate with a hotkey different than the default (i.e. change to <Ctrl> + <Win>). (manual
page 19).
2. Keep the default hot key as <Ctrl> + <Alt> for each Slave unit.
You now want to set the WIN mode for the slaves to display the channels just the way you want to view them, and save that
configuration as presets Win1, Win2, Win3 or Win4. (manual page 37)
3. Enter <Ctrl> + <Win> - <1>
will now control the slave on channel 1.
4. Enter <Ctrl> + <Alt> - <O> (that's the letter "O", not a zero). This will open the OSD menu on the slave switch.
5. Navigate to the configuration of the Win Mode.
101
(if the slave you want to configure is connected to Channel 1 of the master)
Select Mode- Current- and Win1 under Mode (see images on page 37).
SPLITMUX- Installation and Operation Manual
Your keystrokes