Audio - NTI SPLITMUX-DVI-4RT Installation And Operation Manual

OSD - COMPUTER - AUDIO

AUDIO

Use arrow keys to navigate in the COMPUTER menu to the entry AUDIO and press ENTER/SELECT
to open the AUDIO window.
"Enable audio output": To enable or disable the
audio output, activate or deactivate the check box
"Enable audio output".
Selecting audio source: Select the audio source
from the list. To ensure that the audio source is
the computer being currently operated, select
"active channel" from the list. For a fixed audio
source select one of the computers from the list.
Switch channel on audio activity: With this
setting enabled, SPLITMUX automatically
switches to a channel on which an audio signal is
detected.
Volume
To adapt the volume of the audio sources
navigate to VOLUME and press enter/select.
Use this window to adjust the volume for the audio
sources in 2 db steps.
Change the volume of each channel with + and -
SPLITMUX - Installation and Operation Manual
Note: This window can also be opened with the hotkeys HK + -/+. This window can also be opened with the hotkeys HK + -/+.
ON SCREEN DISPLAY
61