Removing Upper Cover; Removing Bottom Service Cover And Rear Cover - Hitachi RAS-2-HVNP Service Manual

10. Servicing
10.3.1.3 Removing upper cover
1 Remove the upper cover upward after removing 9 fixing screws.
1. Upper cover.
10.3.1.4 Removing bottom service cover and rear cover
1 Remove 5 screws which fix the bottom service cover. Pull and remove the bottom service cover.
2 Remove the upper cover following
3 Remove 9 screws which fix the rear cover. Pull backward and remove the rear cover.
N O T E
Pay attention that the screw length for the ambient thermistor differs from other fixing screws.
333
SMGB0079 rev.0 - 01/2013
Removing upper cover.
Air Outlet Grille
Air Outlet Grille
Front Side
Front Side
Piping Cover
Piping Cover
Position of
Position of
Ambient Thermistor
Ambient Thermistor
Rear Cover Rear Cover
Electrical Box
Electrical Box
Rear Cover
Rear Cover
Valve Stay
Valve Stay
Air Inlet Grille
Air Inlet Grille
1
10