System Control; Individual Operation - Hitachi RAS-2-HVNP Service Manual

4. Electrical wiring

4.6 System Control

4.6.1 Individual Operation
Outdoor Unit
DSW6
ON
OFF
1 2
Dip Switch 6 setting
is NOT required.
( The factory setting position is
for the individual operation.)
Individual Thermo ON/OFF Operation
The individual Thermo ON/OFF is available to be controlled each indoor unit even if multiple indoor units are
controlled simultaneously by one remote control switch.
Outdoor Unit
DSW6
ON
OFF
1 2
Control Method
Operation Method
(1) ON/OFF
(2) Setting of Operation Mode
(3) Room Temperature Setting
(4) Fan Speed Setting
(5) Timer Setting
(6) ON/OFF by Timer Control
(7) Operation Indication
(8) Alarm Indication
(9) Self-Checking
(10) Test Mode
(11) Individual Louver Setting
(12) Motion Sensor Setting
N O T E
• Yes: Available
• *1) Cooling and heating can not be operated simultaneously.
• *2) Only for RCI-FSN3 series with PC-ARF
• *3) Only for RCI-FSN3 + P-AP160NAE + PC-ARF
• Do not mix other indoor unit, air panel (P-AP160NA1) and remote control switch (PC-ARF)
• if set from one remote control switch.
106
SMGB0079 rev.0 - 01/2013
Remote Control Switch
(PC-ARF)
Remote Control Switch
(PC-ARF)
by each Optional Remote Control Switch
by One Group
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Control Wiring (H-LINK II)
Indoor Unit
Control Wiring (H-LINK II)
Indoor Unit
Transition Wiring
The transition wiring is required
when operate multiple indoor units
by one (1) remote control switch.
*1)
*2)
*3)