Optional Parts And Installation Ras-(4-6)H(V)Npe / Ras-(8-10)Hn(P/C)E - Hitachi RAS-2-HVNP Service Manual

2. Unit Installation
2.7.3 Optional parts and installation RAS-(4-6)H(V)NPE / RAS-(8-10)HN(P/C)E
  
Air flow guide wind guard and snow protection hood
Optional parts
Air flow guide
Wind guard
Zinc plate
Snow
protection
hood
Stainless plate
(NSSC 180)
  
Air flow guide
Specifications
Model
Quantity
Air discharge Upward (downward)
direction
Material
polypropylene resin
Color
Weight
Accessories
"Wind Guard" or "Snow protection hood" is not
Installation
available to install with air flow guide. ("Guard net"
restriction
is available to be installed together.)
Attaching example of air flow guide
• Attach the air flow guide to the air discharge grille with four (4) screws (supplied).
• The fixing holes are located at 4 positions on the grille. (Screw tightening torque 2.4 3.1 N.m)
• Do not remove the air discharge grille for air flow guide installation.
C A U T I O N
• If the air guide is installed without discharge grille it may cause injury due to rotating fan.
39
SMGB0079 rev.0 - 01/2013
Air outlet
Air inlet of rear side
Air inlet of side face
Air outlet
Air inlet of rear side
Air inlet of side face
AG-335A
2 per unit
left & right
Weather proof
Gray
1.9 kg
Fixing screw x 4
[M5 (SUS) x 20]
Installation manual
Model
AG-335A X 2
WSP-335A X 2
ASG-NP335F X 2
ASG-NP280B
ASG-NP280L
ASG-NP335FS 2X 2
ASG-280BS2
ASG-NP280LS2
Image
1
1
1 Mounting dimension
2 Air flow guide
1 2
3
1 Air flow guide
2 Wind Guard
3 Snow protection hood
2
2