Outdoor Units Ras-12Hnc; Removing Service Cover; Removing Air Outlet Grille - Hitachi RAS-2-HVNP Service Manual

10. Servicing
10.4.3 Outdoor Units RAS-12HNC
10.4.3.1 Removing service cover
N O T E
• Follow the procedure below to remove main parts and components. For mounting follow the reverse procedu-
re of removal.
• Do not expose the refrigerant cycle to the atmosphere for a long period to avoid moisture or dust entering into
the cycle. Be sure to replace parts immediately after removing. Seal the refrigerant cycle when left unattached
for a long period.
1 Remove the 5 fixing screws, slide the service cover downward
and remove it.
• Pay attention not to fall off the service cover.
10.4.3.2 Removing air outlet grille
1 Remove the 8 fixing screws of the shroud.
423
SMGB0079 rev.0 - 01/2013
Air outlet grille
Air Outlet Grille
Air outlet grille
Air Outlet Grille
Shroud Shroud
Service cover
10