Removing Upper Cover; Removing Bottom Service Cover And Rear Cover - Hitachi RAS-(3-6)HVNC1(E) Service Manual

10 Servicing
10.3.3 Removing upper cover
Remove the upper cover upward after removing 9 fixing screws.
10.3.4 Removing bottom service cover and rear cover
1 Remove 5 screws which fix the bottom service cover. Pull and re-
move the bottom service cover.
2 Remove the upper cover following "10.3.3 Removing upper cover".
3 Remove 9 screws which fix the rear cover. Pull backward and re-
move the rear cover.
Air Outlet Grille
Air Outlet Grille
Front Side
Front Side
Piping Cover
Piping Cover
N O T E
Pay attention that the screw length for the ambient thermistor differs from other fixing screws.
362
SMGB0087 rev.0 - 12/2013
1
Electrical Box
Electrical Box
Position of
Position of
Ambient
Ambient Thermistor
Thermistor
Rear Cover Rear Cover
Rear Cover
Rear Cover
Valve Stay
Valve Stay
1
Upper cover
Air Inlet Grille Air Inlet
Grille