Optional Parts And Installation Ras-3Hvnpe / Ras-(4-6)H(V)Nce - Hitachi RAS-2-HVNP Service Manual

2. Unit Installation
2.7.2 Optional parts and installation RAS-3HVNPE / RAS-(4-6)H(V)NCE
  
Air flow guide wind guard and snow protection hood
Optional parts
Air flow guide
Wind guard
Zinc plate
Snow protection
hood
Stainless plate
(SUS304)
  
Air flow guide
Specifications
Model
Quantity
Air discharge
Upward (downward) left & right
direction
Material Weather proof polypropylene resin
Color
Weight
Fixing screw x 4 [M5 (SUS) x 20]
Accessories
"Wind Guard" or "Snow protection hood" is not
Installation
available to install with air flow guide. ("Guard net"
restriction
is available to be installed together.)
Attaching example of air flow guide
• Attach the air flow guide to the air discharge grille with four (4) screws (supplied).
• The fixing holes are located at 4 positions on the grille. (Screw tightening torque 2.4 3.1 N.m)
• Do not remove the air discharge grille for air flow guide installation.
C A U T I O N
• If the air guide is installed without discharge grille it may cause injury due to rotating fan.
34
SMGB0079 rev.0 - 01/2013
Air outlet
Air inlet of rear side
Air inlet of side face
Air outlet
Air inlet of rear side
Air inlet of side face
AG-335A
1 per unit
Gray
1.9 kg
Installation manual
Model
AG-335A
1
WSP-335A
ASG-NP335F
ASG-NP80B
ASG-NP80L
ASG-NP335F52
ASG-NP160BS2
ASG-NP160LS2
1
Air flow guide
2 Wind Guard
3 Snow protection hood
1
1
1 Mounting dimension
2 Air flow guide
2
3
2