Servicing; Outdoor Unit; Removing Service Cover; Removing Air Outlet Grille - Hitachi Utopia RPI-2.5HRG Service Manual

2.

SERVICING

2.1

Outdoor Unit

2.1.1 Removing Service Cover

Remove the main parts according to the following procedures.
To reassemble perform the procedures in reverse.
To prevent contamination of the refrigerant with water or foreign particles, do not expose open to
atmosphere for long periods.
If necessary, seal pipe ends using caps or tape.
Remove the two fixing screws (upper part 1,
lower part 1), slide the service cover downward
and remove.

2.1.2 Removing Air Outlet Grille

Remove the two (2) fixing screws of the shroud. Lift the air outlet grille holding the lower parts and
unhook the extrusion (3 locations) of the air outlet
grille from the shroud.
TURN OFF all power source switches.
Service Cover
Air Outlet Grille
Catch (6 Locations Both Sides)
Tool Phillips Screwdriver
Tool Phillips Screwdriver
Shroud
SERVICING
2-1