Removing Upper Cover; Removing The Bottom Service Cover And Rear Cover - Hitachi RAS-2-HVNP Service Manual

10. Servicing
10.3.2.3 Removing upper cover
1 Remove 11 screws fixing the upper cover and remove the
upper cover upward.
10.3.2.4 Removing the bottom service cover and rear cover
1 Remove 5 screws fixing the lower part of service cover and
remove the lower part of service cover by pulling towards front
side.
2 Remove the upper cover according to the item
upper cover.
3 Remove 10 screws fixing panel and remove the rear panel by
pulling in the arrow direction.
DO NOT touch electrical components while the LED1 (Red) is ON to avoid electrical shock. Wait until the LED
turns off.
347
SMGB0079 rev.0 - 01/2013
Removing
Air outlet
1
grille
Bottom
service cover
Position of am-
bient thermistor
Rear cover
N O T E
Upper cover
1
Rear cover
2
3
Air inlet
5
grille
4
2
Pull
6
10