Rpc-(1.5-6.0)Fsr - Ceiling Type; Removing Air Filter And Air Inlet Grille; Removing Side Cover - Hitachi RCI-1.0FSR Service Manual

7 Servicing
RPC-(1.5-6.0)FSR - Ceiling type

7.4 RPC-(1.5-6.0)FSR - Ceiling type

7.4.1 Removing air filter and air inlet grille

1 The air filter is attached inside the air inlet grille. Open the air
inlet grille and remove the air filter.
2 Press and slide the cover of the air inlet grille in the direction of
the arrow with fingers in the holes on the cover.
3 Then the air inlet grille is opened downward.
4 Lift up the air filter and release the catches on the air inlet grille to
remove the air filter.

7.4.2 Removing side cover

1 Open the air inlet grille downward according to the item
"7.4.1 Removing air filter and air inlet
2 Remove the fixing screw for side cover.
3 Slide the side cover in the direction of the arrow (
3 catches. Then remove the side cover in the direction of the
2
arrow ( ).
4 Remove the supporting string from the side plate.
212 SMGB0137 rev.0 - 05/2021
grille".
1 ) and release
(2 or 3 positions)
Air Inlet Grille
Air inlet grille
Lower side
Air filter
Lift up the air filter
Remove
Remove the supporting string
the supporting string.
Holes
Holes
(2 or 3 Portions)
Upper side
Catch
Catch
Catch 3
Catch 3
1
Fixing Screw Fixing screw
Catch 2
Catch 2
Catch 1
Catch 1
Catch 3
Catch 3
Side
Side Cover
cover
2
Side Plate
Side
plate