1-5-8 Fuser section
(1) Detaching and refitting the fuser unit
Procedure
1. Remove the left cover and right cover
(See page 1-5-3).
2. Remove the wires from three clamps.
3. Remove the connector from the power
source PWB.
4. Unhook four hooks and then remove
the frame left duct.
5. Remove the wires from the clamp.
Clamp
YC105
Connctor
Frame left duct
Hook
Clamp
Wires
Hook
1-5-32
2MH/2MJ/2MK/2ML
Clamps
Power source
PWB
Power source
PWB
Figure 1-5-47
Hook
Hook
Frame left duct
Figure 1-5-48