Paper Is Wrinkled; Offset Occurs; Part Of Image Is Missing; Fusing Is Loose - Kyocera TASKalfa 3510i Service Manual

(13) Paper is wrinkled.

Print example
Paper curled.
Paper damp.
Defective pressure springs.

(14) Offset occurs.

Print example
Deformed or worn cleaning
blade in the drum unit.
Defective fuser unit.
Wrong types of paper.

(15) Part of image is missing.

Print example
Paper damp.
Paper creased.
Drum condensation.
Dirty or flawed drum.
Dirty transfer roller.

(16) Fusing is loose.

Print example
Wrong types of paper.
Flawed heat roller or press
roller.
Defective pressure springs.
Defective fuser heater.
Causes
Check the paper storage conditions.
Check the paper storage conditions.
Replace the fuser unit (see page 1-5-18).
Causes
Replace the drum unit (see page 1-5-16).
Replace the fuser unit (see page 1-5-18).
Check if the paper meets specifications. Replace paper.
Causes
Check the paper storage conditions.
Replace the paper.
Perform the drum refresh operation.
Perform the drum refresh operation.
Flawed drum. Replace the drum unit (see page 1-5-16).
Clean the transfer roller. Replace the transfer roller if it is
extremely dirty (see page 1-5-17).
Causes
Check if the paper meets specifications, replace paper.
Replace the fuser unit (see page 1-5-18).
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
1-4-76
2NL/2P8