Table of Contents
Advertisement
Quality Output
Separator
Definition:
The separator character separates quality output data from symbol data.
Serial Cmd:
<K704,separator,decodes/trigger status>
Default:
,
Options:
Any ASCII character.
Important: The ASCII characters <, >, and
For <:
<K704h,3C>
For >:
<K704h,3E>
,
For
:
<K704h,2C>
See
ASCII Character Entry Modifier
enter ASCII characters as hex values.
Decodes per Trigger Status
Definition:
When this feature is enabled, the Imager enters a state where it processes
frames as configured until the end of a read cycle, with or without a successful
symbol decode. When the read cycle ends, the Imager outputs any
decoded symbol data along with the decodes per trigger count.
Serial Cmd:
<K704,separator,decodes/trigger
Default:
0
Options:
0 = Disabled
MS-4 Imager User's Manual
,
can only be entered as hex pairs:
on page 3-23 for a detailed explanation of how to
status>
1 = Enabled
I/O Parameters
7-49
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-4 and is the answer not in the manual?
Questions and answers