Microscan MS-4 User Manual page 280

Configuration Database Status
Code 93 (Add 64)
If enabled, Code 93 will be active for this database index.
Interleaved 2 of 5 (Add 128)
If enabled, Interleaved 2 of 5 will be active for this database index.
UPC/EAN (Add 256)
If enabled, UPC/EAN will be active for this database index.
PDF417 (Add 512)
If enabled, PDF417 will be active for this database index.
MicroPDF417 (Add 1024)
If enabled, MicroPDF417 will be active for this database index.
BC412 (Add 2048)
If enabled, BC412 will be active for this database index.
DataBar-14 (Add 8192)
If enabled, DataBar-14 will be active for this database index.
Important: If the stacked and non-stacked operation is required, the DataBar-14 com-
mand must be configured as follows: <K482,2>. If the DataBar-14 status parameter in the
<K482> command is set to either DISABLED or ENABLED, the Imager will only read non-
stacked DataBar-14 symbols.
DataBar Limited (Add 16384)
If enabled, DataBar Limited will be active for this database index.
DataBar Extended (Add 32768)
If enabled, DataBar Extended will be active for this database index.
Important: If the stacked and non-stacked operation is required, the DataBar Extended
command must be configured as follows: <K484,2>. If the DataBar Extended status param-
eter in the <K484>
read non-stacked DataBar Extended symbols.
11-8
command is set to either DISABLED or ENABLED, the Imager will only
MS-4 Imager User's Manual