Microscan MS-4 User Manual page 137

Symbol Length #1 (Interleaved 2 of 5)
Usage: Useful in applications where I 2/5 symbols of a specific length are required.
Definition: The Symbol Length # 1 field is one of two fields against which the decoded
symbol is compared before accepting it as valid or rejecting it.
Serial Cmd: <K472,status,check digit status,check digit
length #2,guard bar status,range mode status>
Default: 10
Options: 0 to 64, even only.
Important: If Range Mode is disabled, the length of the symbol must match
either Symbol Length # 1 or Symbol Length # 2 to be considered a valid
symbol.
If Range Mode is enabled, Symbol Length # 1 and Symbol Length # 2 form
a range into which the length of the symbol must fall to be considered valid.
Symbol Length #2 (Interleaved 2 of 5)
Usage: Useful in applications where I 2/5 symbols of a specific length are required.
Definition: The Symbol Length # 2 field is one of two fields against which the decoded
symbol is compared before accepting it as valid or rejecting it.
Serial Cmd: <K472,status,check digit status,check digit output,symbol length
length
Default: 6
Options: 0 to 64, even only.
Important: If Range Mode is disabled, the length of the symbol must match
either Symbol Length # 2 or Symbol Length # 1 to be considered a valid
symbol.
If Range Mode is enabled, Symbol Length # 2 and Symbol Length # 1 form
a range into which the length of the symbol must fall to be considered valid.
MS-4 Imager User's Manual
#2,guard bar status,range mode status>
Symbologies
output,symbol length #1,symbol
#1,symbol
6-15