Microscan MS-4 User Manual page 141

Large Intercharacter Gap (Codabar)
Definition: When disabled, the spaces between characters, or the "inter-character
gap", are ignored during the decode process.
Note: If the inter-character space is large enough to be considered a margin,
the symbol will not decode, regardless of this parameter's setting.
Serial Cmd: <K471,status,start/stop match,start/stop
symbol length status,symbol length,check digit type,check digit output>
Default: Disabled
Options: 0 = Disabled
Fixed Symbol Length Status (Codabar)
Definition: When disabled, the Imager will accept any Codabar symbol provided it
doesn't exceed the system's maximum capabilities.
When enabled, the Imager will reject any Codabar symbol that doesn't
match the fixed length.
Serial Cmd: <K471,status,start/stop match,start/stop output,large intercharacter
symbol length
Default: Disabled
Options: 0 = Disabled
Symbol Length (Codabar)
Definition: This is the value against which all Codabar symbol lengths will be compared.
Serial Cmd: <K471,status,start/stop match,start/stop output,large intercharacter gap,fixed
symbol length
Default: 10
Options: 1 to 64
MS-4 Imager User's Manual
1 = Enabled
status,symbol length,check digit type,check digit output>
1 = Enabled
status,symbol length,check digit type,check digit output>
output,large intercharacter
Symbologies
gap,fixed
gap,fixed
6-19