2.3
eUSB Storage
The AM4211 supports one (1) Solid State Drive. It is a NAND flash disk module with a USB 2.0 interface. The
module is connected to a 2x5 header (refers to J6 on showed in Figure 2-2) on the AM4211 board.
Figure 2-2:AM4211 Quick Reference Sheet
» AM4211 Quick Reference Sheet «
Connectors
J3
Serial Port Connector
SFP+ Connector
J4
J5
DDR3 Memory Socket SO-DIMM ECC
eUSB Flash Connector
J6
J8
AMC Gold Fingers
Jumper Settings
JP1
Reserved
Temperature Sensors
TS1
Top Side Sensor
SO-DIMM Sensor
TS2
TS3
Cavium Internal Sensor
Symbols Chart
Hot Swap
Out of Service
Healthy
Serial Port (RJ45)
LEDs Signification available on back.
Signal Path:
USB Flash Module Connector is located close to the heatsink and the memory socket.
TS3
20
J6
J8
1
JP1
9
TS1
TS2
J5
J3
J4
Cavium Advanced Mezzanine Card
www.kontron.com
AM4211