Fuji Xerox DocumentCentre C400 Series User Manual page 98

3.4 Executing Automatic Gradation Adjustment
8
Place the Magenta color patch of the
Adjustment Chart that was output
against the left side of the document
glass.
Place the Adjustment Chart on the document glass.
9
After placing the adjustment chart,
place five sheets of white paper on top
of it and close the document cover.
3
10
Select Start.
Chart Adjustment
Follow the steps to perform Auto Gradation Adjustment by the machine.
1. Place the Adjustment Chart face down with both Magenta
patches against the left edge of the Document Glass.
2. Place 5 sheets of white paper or more over the chart.
3. Lower the Document Cover and press Start on this screen.
The message "Executing gradation adjustment Copy Job - Text" is displayed, and the machine auto-
matically adjusts the gradation. It takes about 20 seconds to execute gradation adjustment.
After a while, the Auto Gradation Adjustment screen is displayed.
11
To continue automatic gradation adjustment using other screens,
repeat steps 6 to 10.
12
Select Close repeatedly until the System Settings screen is displayed.
13
Select Exit to exit the System Administration Mode.
14
Make a copy and check its image quality.
70
Magenta patches
Stop
Start