Fuji Xerox DocumentCentre C400 Series User Manual page 41

1.1 Main Components and Their Functions
Display (Copy screen)
The following describes the names and functions of parts on the Touch Panel
Display while referring to the Copy screen.
Message area
Ready to copy.
1
Basic Copying
Output Color
Auto
Full Color
Black
Dual Color-Red/Black
More...
q Message area
Displays the machine status, operating instructions and other messages.
q Tab
Lightly touching a tab displays the Basic Copying, Added Features, Image Quality and Others menu
screens.
q Remaining copy memory
Displays the remaining amount of memory. When making copies in the Memory mode, scanned
documents are stored in internal memory before they are delivered.
To make copies in the Memory mode, 128 MB memory kit must be installed.
q Number of copies
Enter the number of copies on the numeric keypad. You can set any number of copies within the
range 1 to 999. To return the number of copies to 1, press the Clear button.
q Select button
Lightly press with your finger to select the desired feature. When a desired feature is selected, the
button will be highlighted, "..." following a button such as More... indicate that the feature has an
additional setup screen.
12
Tab
Added
Image Quality Others
Features
2 Sided Reduce/Enlarge
1->1 Sided 100%
1->2 Sided (H to H) Auto%
2->2 Sided (H to H) 50% A3->A5
2->1 Sided (H to H) 70% A3->A4,B4->B5
More... More...
Selection buttons
Remaining amount of memory
Copy Memory 100%
1
Quantity
Menu Number of copies
Paper Supply
Auto
1 A4 Plain
2 A3 Plain
3 8.5 11'' Plain
More...