Symptoms
Nothing is printed.
Two or more sheets of paper are
being fed simultaneously. (double-
feed)
There is no toner left in the toner car-
tridge.
A probable cause is a high-voltage
power supply malfunction.
White areas or white
A probable cause is a dirty Raster
or
colored
stripes
Output Scanner.
appear.
Is the paper damp?
The paper in use is unsuitable.
The entire page is
When the print was made using tray
printed faint.
5 (Bypass Tray), the size of the actu-
ally loaded paper differed from the
paper size selected on the printer
driver. Or, two or more sheets of
paper are being fed simultaneously.
Check
Fan paper well before loading it.
"2.1 Loading Paper" (P. 28)
Replace with a new toner cartridge.
"3.2.3
(P. 48)
Contact our Customer Support Center.
Clean the Raster Output Scanner.
"3.3.2 Cleaning Internal Components
(Raster Output Scanners)" (P. 63)
Replace with paper from a new ream.
"2.1 Loading Paper" (P. 28)
Load suitable paper.
"2.1 Loading Paper" (P. 28)
Either load paper of the correct size in
tray 5 (Bypass Tray), or fan the paper
thoroughly before loading it again.
"2.1 Loading Paper" (P. 28)
4.3 Poor Print Quality
Remedy
Replacing
Toner
Cartridges"
4
83