Fuji Xerox DocumentCentre C400 Series User Manual page 204

5.8 Scan Mode Settings
9. Lighter/Darker
Set the default of Lighter/Darker under Lighter/Darker/Contrast in the Image Quality/File Format
screen. Enter the setting values using the numeric keypad referring to the table below.
(Default is 3 as Normal.)
Setting Value
For details about Lighter/Darker, see "3.3.11 Lighter/Darker/Contrast" in "Part 2 Scanner" of the User Guide
(Printer/Scanner).
10. Contrast
Set the default of Contrast under Lighter/Darker/Contrast in the Image Quality/File Format screen.
Set the contrast for the document to be scanned. The contrast setting is enabled when Output Color is
not set to Black.
5 Enter the setting values using the numeric keypad referring to the table below.
(Default is 2 as Normal.)
Setting Value
For details about contrast, see "3.3.11 Lighter/Darker/Contrast" in "Part 2 Scanner" of the User Guide
(Printer/Scanner).
176
0 Lighter (+3)
1 Lighter (+2)
2 Lighter (+1)
3 Normal
4 Darker (+1)
5 Darker (+2)
6 Darker (+3)
0 Higher
1 High
2 Normal
3 Low
4 Lower
Description
Description