Fuji Xerox DocumentCentre C400 Series User Manual page 307

q To stop a copy job while it is in progress
To stop a copy job while it is in progress, press the Stop button. Copying can also be stopped by selecting
the Stop button that is displayed on the display during copying. To continue copying, press the Start button
again. To stop a copy job, press the Clear button.
To clear feature settings
q
To clear all currently set features in a single operation, press the Clear All button. Pressing the Clear All
button returns all settings to the same defaults as when the power is turned On. The Clear All button cannot
be used while copying is in progress. The Clear All feature can also be activated automatically by a timer.
For details about setting timers, see "5.4.1 Machine Clock/Timers" (P. 123) in "Part 1 Hardware".
To correct the number of copies
q
If you made a mistake when entering the number of copies, press the Clear button. Pressing the Clear but-
ton resets the number of copies to 1. The details of other settings are not cleared.
Auto Tray Switching
When a tray runs out of paper during copying, this feature automatically switches
the currently used tray to another containing the same size and paper type (plain
paper) so that copying can be continued. This feature is called "Auto Tray
Switching". Set this Auto Tray Switch feature in the System Administration Mode.
As the default setting, all trays are covered by this feature. When the same side
and quality (plain paper) of paper is loaded in all trays, the order of priority in
switching is 1 → 2 → 3 → 4. This order of priority can also be set in the System
Administration Mode.
When the optional High Capacity Tray is installed, the High Capacity Tray becomes tray 3 (high
q
capacity) and tray 4 (high capacity).
If Auto under Reduce/Enlarge, Independent X-Y%, Multiple Up, Poster or Booklet under Reduce/
q
Enlarge is selected when Auto is selected for a tray, the setting will be changed to Auto Paper Off.
The setting value of Auto Paper Off can also be changed. For details about how to set
q
this feature, see "5.5.3 Copy Control" (P. 153) in "Part 1 Hardware".
For details about setting the order of priority for the Auto Tray Switch feature, see "5.5.3 Copy Con-
trol" (P. 153) in "Part 1 Hardware".
2.1 Overview of Basic Copy Features
2
281