Fuji Xerox DocumentCentre C400 Series User Manual page 473

Error Code
016-761 "Cause" An error occurred during image processing.
"Remedy" Set the Print Mode to Speed Priority and instruct printing again. If this
016-762
"Cause" A print language not supported on the machine was specified.
"Remedy" Specify the print language at Print Mode Specification under Port Set-
016-763
"Cause" A Scanning of the gradation compensation chart ended in error.
"Remedy" Place the tone compensation chart correctly on the document glass.
016-764
"Cause" Could not connect to the SMTP server.
"Remedy" Contact the SMTP server administrator.
016-765 "Cause" Could not send mail as the hard disk on the SMTP server was full.
"Remedy" Contact the SMTP server administrator.
016-766
"Cause" An error occurred on the SMTP server.
"Remedy" Contact the SMTP server administrator.
016-767 "Cause" Could not send mail as the mail address was wrong.
"Remedy" Confirm the mail address, and try sending the mail again.
016-768
"Cause" Could not connect to the SMTP server as the mail address of this
"Remedy" Check the mail address of this machine.
016-769 "Cause" The SMTP server does not support confirmation of mail distribution
"Remedy" Send mail without setting confirmation of mail distribution (DSN).
016-770
"Cause" The job template could not be processed due to insufficient hard disk
"Remedy" Delete unwanted data from the hard disk to increase hard disk space.
016-771
"Cause" Could not acquire the scan data repository address for the job tem-
016-772
"Remedy" Correctly set the DNS address. Or, set the address of the scan data
016-773 "Cause" The machine's IP address is not set correctly.
"Remedy" Check the DHCP environment. Or, set a fixed IP address to the
016-774
"Cause" Compression conversion could not be processed due to insufficient
"Remedy" Delete unwanted data from the hard disk to increase hard disk space.
016-775
"Cause" Image conversion could not be processed due to insufficient hard disk
"Remedy" Delete unwanted data from the hard disk to increase hard disk space.
016-776
"Cause" An error occurred during image conversion processing.
"Remedy" Image conversion processing is sometimes completed for part of the
016-777
"Cause" An error occurred on the hard disk during image processing.
"Remedy" A probable cause is a hard disk malfunction. For details about replac-
016-778 "Cause" Conversion of the scan image was discontinued due to insufficient
"Remedy" Delete unwanted data from the hard disk to increase hard disk space.
Cause/Remedy
does not remedy printing, print in the Ensure Print mode.
tings.
machine was incorrect.
(DSN).
space.
plate used for the scan.
repository by an IP address.
machine.
hard disk space.
space.
data. Check the data in CentreWare Internet Services.
ing hard disks, contact our Customer Support Center.
hard disk space.
E Error Codes Displayed on the Display
449