Fuji Xerox DocumentCentre C400 Series User Manual page 440

3.30 Making Copies of Documents at Different Settings in a Single Operation - Build Job
sWhen Sample Set is set to Off
When the Off button is selected for Sample Set at step 5, the procedure ends at this step. Setting up of
the Build Job feature ends, and copying of all documents begins.
sWhen Sample Set is set to On
Output of the sample copy begins and only one copy is output at the details preset to the Build Job fea-
ture.
When the On button is selected for Sample Set at step 5, proceed to step 16.
Sample Set selected -- Making copies...
Copy Job
Quantity:
Quantity:
Black
1
3
15
Confirm the output state of the sample copy.
16
After you have confirmed the output state, select whether or not to out-
put the remaining number of copies.
Check whether the output is desirable.
Touch Start to continue or Stop to cancel the job.
Copy Job
Quantity:
Quantity:
sTo cancel copying of the remaining copies
Select the Stop button. Copying of the remaining number of copies is canceled.
sTo change the number of copies
Select Change Settings....
1
Copy Job
Quantity:
Quantity:
The Change Settings screen is displayed.
414
:Doc. No. 00002
1/20
10/10
A 4
:Doc. No. 00002
1/20
180/180
Change Settings...
:Doc. No. 00002
1/20
180/180
Change Settings...
Free Memory 80%
1
Close
Stop
Free Memory 80%
1
Close
Stop
Start
Close
Stop
Start