Fuji Xerox DocumentCentre C400 Series User Manual page 62

2.2 Changing the Size of Paper in Trays
4
Move the paper guide to the right while
holding the grip on the paper guide
lever on the right inside the tray.
5
Load and align the edge of the paper
against the left front edge of the tray
with the side to be copied or printed on
2
facing up.
Do not load mixed size paper into the tray. This may
q
cause a paper jam.
Do not load paper exceeding the maximum fill line.
q
Doing so might cause paper jams or machine trouble.
6
Move the two paper guide levers while
holding their grips so that they lightly
contact the edges of the paper.
Exerting excessive pressure when aligning the paper
q
levers against the edges of the paper might cause
paper jams.
Make sure that the paper guides fit flush into the holes
q
on the scale. Otherwise, the paper size might not be
automatically detected. In this case, slide the paper
guides back and then re-align them with the scale.
7
Push the tray in gently until it comes to
a stop.
Affix the paper size label to the front of the paper tray.
8
After changing the paper size, set the paper type (plain paper, bond
paper, recycled paper, custom paper 1 to 5) for the paper tray.
For details about how to set the paper type, see "2.3 Changing Paper Settings" (P. 35).
34