Fuji Xerox DocumentCentre C400 Series User Manual page 472

E Error Codes Displayed on the Display
Error Code
016-735
016-737
016-739
016-740
016-741
016-742
016-743
016-744
016-745
016-748
016-749
016-757
016-758
016-759
016-760
448
"Cause" An attempt was made to print a job template while it was being
updated.
"Remedy" Wait a while before instructing it to print again.
"Cause" An error occurred during reading of data from the job template pool
server.
"Remedy" Check the access rights of the directory to which the job template is
stored.
"Cause" Could not find the specified job template pool server.
"Remedy" Check the path name to the job template pool server.
"Cause" Could not log into the job template pool server.
"Remedy" Check the login user name, password and other information.
"Cause" Could not connect to the job template pool server.
"Remedy" Ask the network administrator to check the network environment or
server environment.
"Cause" The job template could not be stored to memory due to insufficient
hard disk space.
"Remedy" Delete unwanted data from the hard disk to increase hard disk space.
"Cause" The settings on the job template pool server are incorrect.
"Remedy" Check the settings of the job template pool server.
"Cause" There is a problem in the domain name of the job template pool server.
"Remedy" Make sure that the DNS server connection and the domain name are
registered to the DNS server.
"Cause" The address of the DNS server is not registered on this machine.
"Remedy" Either register the address of the DNS server on this machine, or set
the address of the job template pool server by an IP address.
"Cause" Printing is not possible due to insufficient hard disk space.
"Remedy" Reduce the number of pages of print data, for example, by dividing up
the print data or printing one copy at a time when making multiple cop-
ies.
"Cause" A PJL command syntax error occurred.
"Remedy" Either confirm the print settings, or correct the PJL command.
"Cause" The entered password is wrong.
"Remedy" Enter the correct password.
"Cause" The account is not registered as an authorized copy user.
"Remedy" Contact the System Administrator.
"Cause" The maximum number of copies has been reached.
"Remedy" Contact the System Administrator.
"Cause" An error occurred during PostScript processing.
"Remedy" Take one of the following actions:
Set Print Mode to Speed Priority.
q
Increase the size of the print page buffer.
q
Increase PostScript memory.
q
See the relevant descriptions under "Part 1 Printer" of the User Guide (Printer/Scanner).
q
For details about Print Mode, the On-line Help of the printer driver.
q
About print page buffer and PostScript memory, the On-line Help of the printer driver.
q
Cause/Remedy