Fuji Xerox DocumentCentre C400 Series User Manual page 436

3.30 Making Copies of Documents at Different Settings in a Single Operation - Build Job
Procedure
1
Load the document that is to be scanned by the first build job setup.
2
Enter the number of copies using the numeric keypad.
3
Select Build Job in the Others screen.
Basic Copying
3
The Build Job screen is displayed.
4
Select On.
Build Job
The Sample Set button for setting whether or not to output the sample copy is displayed in the center
of the screen.
5
Select whether or not to output the sample print.
In this example, select the On button at Sample Set.
Build Job
6
Select Save.
The screen returns to the Others screen.
410
Added
Image Quality
Features
Covers
Booklet Creation
No Covers Off
Repeat Image Poster
Off Off
Stored Jobs
Build Job
Off
This feature scans and merges individual job segments
with different features programmed. Segments can consist
of one or more originals.
Off
Not that features which apply to the entire jobs such as
Covers, Booklet Creation, Stapling* and Output Destination
On
need to be selected first.
*Stapling is an optional feature.
Sample Set
Select On to make a proof set of your
Off
Off originals. Check output. Press Start
to print the remaining sets or Stop to
cancel the job.
On
On
The sample set is counted as part of the
quantity selected.
Menu
Others
Book Duplex
Off
Mirror/Negative Image
Mirror Image: Off
Negative Image: Off
Original Orientation
Head to Top
Cancel Save
Cancel Save