Fuji Xerox DocumentCentre C400 Series User Manual page 196

5.7 Print Mode Settings
HP - GL/2 Auto Layout Memory
Specify the size of memory used for HP-GL/2
Set any size within the range 64 to 5120 KB in 32 KB increments.
The maximum value that can be set changes according to the amount of remaining free memory.
(Default is 64 KB.)
Receive Buffer - Parallel
Set the receive buffer on the parallel interface.
Set any size within the range 64 to 1024 KB in 32 KB increments.
(Default is 64 KB.)
Receive Buffer - LPD
Off
Spooling is not performed. While LPD printing from a certain client is being processed, data can-
not be received on the same interface from other clients. Set the memory size of LPD-exclusive
receive buffer within 64 to 1024 KB in 32 KB increments.
The default memory size is 256 KB.
Memory
Spooling is performed. Memory is used as the receive buffer for spooling. When you have
selected this parameter setting, set the size of the receive buffer memory for spooling within the
range 512 KB to 32.00 MB in 0.25 MB increments. The default memory size is 1.00 MB. Print
data larger than the memory size set here cannot be received. In this case, select Hard Disk or Off.
Hard Disk
Spooling is performed. The hard disk is used as the receive buffer for spooling.
5
(Default is Off.)
Receive Buffer - NetWare
Set the receive buffer for NetWare.
Set any size within the range 64 to 1024 KB in 32 KB increments.
(Default is 256 KB.)
Receive Buffer - SMB
Off
Spooling is not performed. While SMB printing from a certain client is being processed, data
cannot be received on the same interface from other clients.
Set the memory size of SMB-exclusive receive buffer within 64 to 1024 KB in 32 KB incre-
ments. The default memory size is 256 KB.
Memory
Spooling is performed. Memory is used as the receive buffer for spooling.
When you have selected this parameter setting, set the size of the receive buffer memory for
spooling within the range 512 KB to 32.00 MB in 0.25 MB increments. The default memory size
is 1.00 MB. Print data larger than the memory size set here cannot be received. In this case, select
Hard Disk or Off.
Hard Disk
Spooling is performed. The hard disk is used as the receive buffer for spooling.
(Default is Off.)
168