Placing Documents On The Document Glass - Fuji Xerox DocumentCentre C400 Series User Manual

3 Select the type of document to copy.
Original Type
Text & Photo
Text
Photo
Other Color
Originals
For details about Original Type, see "3.16 Selecting the Original Type - Original Type" (P. 365).
The copy density can also be adjusted in seven levels as required. The default setting is Normal. For
details about setting the copy density, see "3.18 Adjusting Copy Density and Contrast - Lighter/
Darker/Contrast" (P. 371).
7
Enter the number of copies on the numeric keypad.
The number of copies is displayed at the top right of the screen.
If you made a mistake when entering the number of copies, press the Clear button.
Pressing the Clear button resets the number of copies to 1. The details of other settings are not
cleared.
8
Press Start.
Scanning of the document starts, and copies are delivered onto the output tray.
sWhen making another copy
You can inform the machine that there is another document to copy while it is scanning a document.
This is useful, for example, when you are loading two or more documents on the DADF or when you
are making two sided copies by placing documents on the document glass.
When you are scanning two or more documents, you can inform the machine that they are a single set
of data.
1 Select Next Original while scanning is in progress.
Copy Job
1/1
No. of Sets
:
5/50
No. of Pages
:
1
Originals :
(A 4 )
Full Color
100%
1 A 4
Collated
Photo Type
Halftone
Photograph
Color Copies
:Doc. No. 00002
2.1 Overview of Basic Copy Features
Cancel Save
Close
Stop
Last Original
Next Original
2
279