Fuji Xerox DocumentCentre C400 Series User Manual page 188

5.6 Network Settings
LPD
Set the following items when using LPD:
sPort Status
Set whether to Enabled or Disabled the Port Status when the power is turned on.
When LPD is used, set to Enabled.
(Default is Enabled.)
When the Port Status is set to Enabled, the port status is sometimes automatically set to Disabled if there is
insufficient memory. If this happens, either set the status of the unused port to Disabled, or change the assigned
memory size.
The IP address must be set to start the LPD port.
NetWare
Set the following items when using NetWare.
sPort Status
Set whether to Enabled or Disabled the NetWare port status when the power is turned on. When Net-
Ware is used, set to Enabled.
(Default is Disabled.)
5
When the port status is set to Enabled, the port status is sometimes automatically set to Disabled if there is insuf-
ficient memory. If this happens, either set the status of the unused port to Disabled, or change the assigned mem-
ory size.
160