Scan Defaults - Fuji Xerox DocumentCentre C400 Series User Manual

5.8.2

Scan Defaults

Set the defaults for scanner features. The machine returns to the defaults set
here when the power is turned on, when the machine exits the Power Saver
mode, or when the Clear All button is pressed. Setting frequently used features
and values to their defaults frees you from unnecessary operations each time
you perform a specific operation.
Scan Defaults allows you to set the following items:
1. Output Color
q
2. Scan Resolution
q
3. Mixed Size Originals
q
4. Border Erase - Top & Bottom
q
5. Border Erase - Left & Right
q
6. Center Erase
q
1. Output Color
Set the default of Output Color in the Basic Scanning screen.
Select one of Auto, Full Color, Grayscale or Black/White to select.
(Default is Black.)
For details about the Output Color, see "3.3.1 Output Color" in "Part 2 Scanner" of the User
Guide (Printer/Scanner).
2. Scan Resolution
Set the default of Scan Resolution in the Basic Scanning screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as 200 dpi.)
Setting Value
0
1
2
3
When the resolution is set to 3 or 600 dpi, at least 256 MB of memory is required on this machine to scan at Full
Color for the Output Color.
For details about the Scan Resolution, see "3.3.2 Scan Resolution" in "Part 2 Scanner" of the User
Guide (Printer/Scanner).
7. Original Orientation
q
8. Original Type
q
9. Lighter/Darker
q
10. Contrast
q
11. Auto Exposure
q
200 dpi
300 dpi
400 dpi
600 dpi
5.8 Scan Mode Settings
Description
5
173