Fuji Xerox DocumentCentre C400 Series User Manual page 190

5.6 Network Settings
Salutation
Set the following items when using Salutation. Salutation must be set when using scanning features.
sPort Status
Set whether to Enabled or Disabled the Salutation port status when the power is turned on. When
Salutation is used, set to Enabled.
(Default is Disabled.)
When the port status is set to Enabled, the port status is sometimes automatically set to Disabled if there is insuf-
ficient memory. If this happens, either set the status of the unused port to Disabled, or change the assigned mem-
ory size.
Port 9100
Set this item when using Port 9100. Set to Enabled when using Port 9100.
sPort
Set whether to set the Port 9100 port status to Enabled or Disabled when the machine is turned on.
(Default is Disabled.)
If the machine runs out of memory when the port status is set to Enabled, the port status is sometimes automati-
cally set to Disabled. If this happens, either set the status of the unused port to Disabled, or change the assigned
memory size.
5
SNMP
Set the following items when using SNMP. SNMP must be set when using applications for remote
managing two or more printers. Printer information is managed by SNMP, and the application col-
lects printer information from SNMP.
sPort Status
Set whether to Enabled or Disabled the SNMP port status when the power is turned on.
(Default is Enabled.)
When the port status is set to Enabled, the port status is sometimes automatically set to Disabled if there is insuf-
ficient memory. If this happens, either set the status of the unused port to Disabled, or change the assigned mem-
ory size.
162