Fuji Xerox DocumentCentre C400 Series User Manual page 173

9. Output Destination
Set the default output destination during copying or printing. This item is displayed when the finisher
or Face Up Side Tray is installed.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as Center Output Tray.)
Setting Value
0
1
2
When Tray 5 (Bypass) is set at 6. Paper Supply, and Finisher Tray is set at 9. Output Destination, the Paper
Supply setting in the Basic Copying screen is set to Auto.
10. Margin Shift - Side 1
Set the default of Side 1 under Margin Shift in the Added Features screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as No Shift.)
Setting Value
0
1
2
3
4
5
6
7
8
9
For details about the Margin Shift, see "3.8 Moving the Position of Images in the Copy - Margin Shift" (P. 333)
in "Part 2 Copier".
Center Output Tray
Side Output Tray
Finisher Tray
No Shift
Auto Center
Corner Shift (Top Right)
Corner Shift (Bottom Right)
Corner Shift (Top Left)
Corner Shift (Bottom Left)
Corner Shift (Top Center)
Corner Shift (Bottom Center)
Corner Shift (Left Center)
Corner Shift (Right Center)
5.5 Copy Mode Settings
Description
Description
5
145