Replacing The Toner Collection Bottle B - Fuji Xerox DocumentCentre C400 Series User Manual

3.2.4

Replacing the Toner Collection Bottle B

Toner remaining in the drum after copying or printing is collected and accumu-
lated in the toner collection bottle. When the toner collection bottle fills up, a mes-
sage is displayed on the display.
If you continue making copies or prints without replacing the toner collection bot-
tle, a message is displayed, and the machine stops after copying or printing
about 900 pages. When replacing the toner collection bottle, use the cleaning
rod packaged in the toner collection bottle box to clean the Raster Output Scan-
ners (D1, D2, D3, and D4) to prevent uneven color density during copying or
printing.
Never throw toner, a toner collection bottle or a toner cartridge into an
open flame. It can cause an explosion and you can get burnt.
When replacing toner collection bottles, collected toner may spill and dirty the floor. So, we recom-
q
mend laying paper on the floor before replacing toner collection bottles.
Post-consumer toner collection bottles require disposal. Return used toner collection bottles to our
q
Customer Support Center.
Use of toner collection bottles not recommended by Xerox may effect print quality or impair
q
machine performance. Use only toner collection bottles recommended by Xerox on this machine.
Toner collection bottles can be replaced with the machine still on. When the power is turned off,
q
all information stored to the machine's memory will be erased.
The number of pages that can be printed is the number of pages when using A4 (
q
The number of pages that can be printed is only an estimate and varies depending on the content,
q
paper size, variety, and the computer environment.
Procedure
1
Prepare a new toner collection bottle.
Remove the new bottle, orange vinyl cap, and cleaning
rod from the box.
3.2 Replacing Consumables
).
3
51