Fuji Xerox DocumentCentre C400 Series User Manual page 322

3.2 Selecting the Color to Copy - Output Color
When Color Only is selected in color limits, Black-and-white and Auto cannot be selected. Also, when B/W Only
q
is set, Full Color, Single Color, Dual Color, and Auto cannot be selected.
Procedure
1
Load the document.
For details about loading documents, see "1.2 Loading Documents" (P. 270).
2
Set the color mode type to make copies at Output Color in the Basic
Copying screen.
Basic Copying
Output Color
3
Auto
Full Color
Black
Dual Color-Red/Black
More...
3
If the desired color mode is not displayed on screen at Output Color,
select More....
The Output Color screen is displayed.
The resulting color in the copy differs in the following two instances: when copies are made with
q
the same color set at Color Image and Black/White Image for Dual Color, and when copies are
made with the color set at Color Selection for Single Color.
The color displayed at Color Setting can be set. For details about how to set this feature, see "5.5.2
q
Copy Defaults" (P. 141) in "Part 1 Hardware".
sWhen the Dual Color button is selected
To specify the color of colored areas in the document, select Color
1
Image.
Output Color
The Color Image screen is displayed.
296
Added
Image Quality
Features
2 Sided
1->1 Sided
1->2 Sided (H to H)
2->2 Sided (H to H)
2->1 Sided (H to H)
More...
Auto
Dual Color
Full Color
Single Color
Black
Others
Reduce/Enlarge
Paper Supply
100% Auto
Auto%
1 A4
50% A3->A5
2 A3
70% A3->A4,B4->B5
3 8.5 11'' Plain
More... More...
Cancel Save
Dual Color
Color Image
Red
Black/White Image
Black
Menu
Plain
Plain