Fuji Xerox DocumentCentre C400 Series User Manual page 474

E Error Codes Displayed on the Display
Error Code
016-779
016-780
016-781
016-782
016-783
016-784
016-785
016-787
016-788
016-793
020-530
021-751
116-701
450
"Cause" An error occurred during conversion processing of the scan image.
"Remedy" Instruct scanning again.
"Cause" An error occurred on the hard disk during conversion processing of the
scan image.
"Remedy" A probable cause is a hard disk malfunction. For details about replac-
ing hard disks, contact our Customer Support Center.
"Cause" Could not connect to the FTP server for the job template used for the
scan.
"Remedy" Ask the network administrator to check the network environment or
server environment.
"Cause" Could not log in to the FTP server for the job template used for the
scan.
"Remedy" Check the login user name, password and other information.
"Cause" Could not find the specified server path during file forwarding for the
job template used for the scan.
"Remedy" Check the path name of the server currently set to the job template.
Help for CentreWare Internet Services or the CentreWare Scanning Services Installation
Guide.
"Cause" A write to FTP server error occurred for the job template used for the
scan.
"Remedy" Confirm that there is sufficient space in the directory on the server, and
that access rights are present.
"Cause" The file could not be sent due to insufficient space on the server's hard
disk for the job template used for the scan.
"Remedy" Delete unwanted data from the server's hard disk to increase hard disk
space.
"Cause" The server IP address set to the job template is illegal.
"Remedy" Specify the correct job template.
"Cause" Failed to retrieve the file from the Web browser.
"Remedy" Take one of the following actions, and then try retrieving again.
Refresh the browser page.
q
Restart the browser.
q
Turn the machine off then back on again.
q
"Cause" The hard disk has run out free space.
"Remedy" Either delete unwanted data from the hard disk to increase free disk
space, or initialize the hard disk.
"Cause" No correct operations were performed in a certain period of time.
"Remedy" Perform an operation within a certain period of time.
"Cause" You could not contact our Customer Support Center due to a commu-
nications line error when asking for inspection or repair.
"Remedy" Make sure that the telephone line is connected, wait a while, and then
ask for inspection or repair again. If an error code is displayed, contact
our Customer Support Center.
"Cause" 2 sided printing was not possible due to insufficient memory.
"Remedy" Add on memory.
Cause/Remedy