Fuji Xerox DocumentCentre C400 Series User Manual page 203

6. Center Erase
Select the default value for the center erase. The center erase is assigned referenced to the center line
of the printed image.
(Default is 0 mm.)
Setting Value
0
1 to 50
For details about setting center erase, see "3.3.9 Border Erase" in "Part 2 Scanner" of the User Guide
(Printer/Scanner).
7. Original Orientation
Set the orientation of the document when it is scanned.
Judgment as to the left, right, top and bottom of the document changes by the setting made
here.When 0 of Head to Top is set, the document will be saved rotated by 90 degrees at all times.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 1 as Head to Left.)
Setting Value
0
1
For details about the orientation when loading documents, see "2.2.3 Document Orientation" in "Part 2 Scan-
ner" of the User Guide (Printer/Scanner).
8. Original Type
Set the default of Original Type in the Image Quality/File Format screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as Text.)
Setting Value
0
1
2
For details about Original Type, see "3.3.10 Original Type" in "Part 2 Scanner" of the User Guide (Printer/
Scanner).
None
Set the center erase dimensions in 1 mm increments.
Head to Top
Head to Left
Text
Text & Photo
Photo
5.8 Scan Mode Settings
Description
Description
Description
5
175