Fuji Xerox DocumentCentre C400 Series User Manual page 255

6.6 Printing Reports/Lists
sErroneous Completion of Jobs
The following completion details are sometimes printed at "Job Processing Sta-
tus":
Print parameter in error
Insufficient print page
buffer
Unexpected error
6
Print language automatic
recognition error
Insufficient hard disk space "Cause" Printing is not possible due to insufficient hard disk
PJL command error
228
Printed Details
"Cause" An illegal print parameter combination was set. For
"Remedy"Check the print data. In the above case, select tray
"Case" PCL print data could not be processed as there was
"Remedy" Take one of the following actions:
See the descriptions under "Part 1 Printer" in the User Guide
(Printer/Scanner).
About print page buffer, "1.5 Memory Allocation".
For details about the Ensure Print, see the Online Help of the
printer driver for details.
"Cause" An error occurred during print processing.Printing
"Remedy" When printing by automatic tray selection, set one
See "
Tray Attributes".
"Cause" The print language cannot be automatically selected
"Remedy" The PostScript
"Remedy" Reduce the number of pages of print data, for
"Cause" A PJL command syntax error occurred.
"Remedy" Either confirm the print settings, or correct the PJL
Cause and Remedy
example a non-standard size was specified, and
Tray Selection was set to Auto.
5 (Bypass Tray).
insufficient space in the printer page buffer.
Set Print Mode to Speed Priority.
q
Use Ensure Print.
q
q Increase the size of the print page buffer.
q Add on memory.
was instructed by automatic tray selection when
Paper Type Priority is set to Automatic Tray witch-
ing Off for all paper in the Common Settings.
of the paper types to a setting other than Automatic
Tray witching Off in Paper Type Priority.
Paper Type Priority" (P. 129) in "5.4.4 Setting Paper
when the print mode specified is set to Auto. Prob-
able causes are as follows:
PostScript data was sent without the PostScript
Software Kit installed.
®
Software Kit must be installed.
space.
example, by dividing up the print data or printing
one copy at a time when making multiple copies.
command.
®