Fuji Xerox DocumentCentre C400 Series User Manual page 71

4
If necessary, check the machine configuration or software version.
sTo check the machine configuration
1
Select Machine Configuration.
Machine Information
For enquiry on maintenance and operation
Refer to the card pasted on the machine
or call your local Service Represantative.
Serial Number
017011968
The Machine Configuration screen is displayed.
2
Check the machine configuration using
Machine Configuration
Items
1. Configuration Code
2. Auto Document Feeder
3. Paper Tray
4. High Capacity Tray
5. Side Output Tray
The following items can be confirmed in the Machine Configuration screen:
Configuration Code
q
Paper Tray
q
Side Output Tray
q
Offset Output Module
q
Hard Disk
q
System Memory Size
q
HP-GL/2
q
FAX Extended Board 1
q
Output Device refers to installation of the finisher (option). If the finisher is installed, Finisher is dis-
played.
3.1 Confirming Machine Status
Machine Configuration
79832133
Software Version
XX. XX. XX
.
Contents
XXXXXXXX
Available
4 Trays (3-Tray Unit)
Unavailable
Unavailable
Auto Document Feeder
q
High Capacity Tray
q
Output Device
q
Duplex Module
q
Page Memory Size
q
PostScript, HP-GL/2
q
FAX Main Board
q
FAX Extended Board 2
q
Close
Close
Page
1/4
3
43